Was: 11.25
Price: 8.99
Application The anaerobic thread locking to avoid loosening and leakage of threaded fasteners For M6 M36 thread locking and sealing Prevent thread corrosion Typical uses screw locking Specification Base chemical composition methyl methacrylate Appearance Red viscous liquid Viscosity mPa s 8000 15000 Specific Gravity 1 12Flash point C 93Maximum fill the gap mm 0 25Room temperature curing time min 15After curing properties Full cure time at room temperature hr 24 Destruction of torque Nm 25The average removal torque Nm 20 Operating Temperature C 54 203 Instructions for use painted surfaces should be clean dry and no oil bolts painted in sufficient quantity to fill all engaged threads a thin layer of the product results in a 0 05 mm or less work best For large thread sizes the larger the gap will affect cure speed and strength of the product This product will reduce the friction force torque tension ratio assembly generated Need to be fastened to the threaded applications critical value the need to determine in advance a good ratio Caution The anaerobic thread locking should not be used on plastic parts in order to avoid contamination of the original glue do not have poured the glue back to the original packaging Safety Precautions The anaerobic thread locking containing methyl acrylate skin and eye irritation If skin contact immediately wash with water If contact with eyes rinse immediately with water and go to
https://ad.admitad.com/g/e8f129b05ed12a4616dd6213826a88/?f_id=19362&ulp=https%3A%2F%2Fwww.banggood.com%2FKafuter-K-0272-High-Intensity-Screw-Glue-Anaerobic-Adhesive-for-RC-Model-p-1436236.html%3Fcurrency%3DEUR&i=5
Leave a Reply