Was:
Price: 18.49
Specifications Brand HappymodelSize 18×15 5×4 5With Built in Voltage booster moduleWorking voltage 3v 4 35vWeight 1 5gramSD Card support max to 32GBSD Card need to use FAT32 FormatNotes Need to careful to insert the TF SD Card and don t pull it out while install the battery Blackbox is a very useful tools to the FPV pilots They are used to using black box data analysis software to tune PID and filter parameters Due to the limited size of many flight controllers especially AIO flight controllers although they have onboard black box functions their storage capacity is very limited Our Blackbox is based on the latest Openlager hardware uses a separate STM32F411 as the processor has an independent TF card slot and supports up to 32GB memory TF card The growing popularity of Gyroflow an open source stabilizer makes the storage and reading of gyro data in flight controllers more important Our Mobula7 1S HD aircraft is equipped with this Black box The Black box also has a boost module to power the Runcam Split3 lite making it run stably when the battery voltage is low Prepare your own Micro SD card Connect the Blackbox module and the flight controller correctly Refer to the wiring diagram for the connection method Use our Mobula7 1S HD as a sample Enable Blackbox logging in the peripherals of UART1 set the baud rate to be 2000000 For Gyroflow useage Move to blackbox tab the and select Serial Port 250HZ GYRO RAW After each setting is completed click the
https://dorinebeaumont.com/g/e8f129b05ed12a4616dd6213826a88/?f_id=19343&ulp=https%3A%2F%2Fwww.banggood.com%2FHappymodel-Mobula7-1S-HD-Spare-Part-Openlager-High-speed-Serial-Port-Blackbox-Module-For-Betaflight-Fpv-Drone-support-Gyroflow-p-1979128.html%3Fcurrency%3DEUR
Leave a Reply