Flywoo EL24P 2.4GHz ExpressLRS ELRS 0.4g Ultra Lightweight Open Source Nano Receiver for FPV Racer Drone

Was:
Price: 17.56

Flywoo EL24P 2 4GHz ExpressLRS ELRS 0 4g Ultra Lightweight Open Source Nano Receiver for FPV Racer DroneDescription Brand FlywooModel EL24P Nano ReceiverType ISMESP8285 MCUSX1280IMLTRT RF ModuleFrequency Range 2400 MHz to 2500 MHzMaximum receive refresh rate 500HzMinimum receiver refresh rate 25HzWorking voltage 5vWeight 0 4gDimension 10 8mm 11mm 6mmPeak gain 3 2dBFeatures The Flywoo 2 4GHz Elrs Nano Series Receiver is an Open Source Program Based on Expresslrs the Lightweight the Lightweight Minimal Size Use ESP8285 MCU So You Can Upgrade Firmware by WiFi That s Too Simple EL24P ESP8285 MCU SX1280 RF CHIP use IPX ports connect external T type antennas farther distance stronger signalDue to the low latency and high refresh rate rf module They is the Ultra Light and nano size of the Ultra Light and Nano Size Bind procedure Supply power to the EL24E EL24P rx wait until the LED on the RX is off immediately turn off the power and then repeat again the above steps When the RX is powered on for the third time the LED light will start to double flash which means that the RX enters the binding mode Insert the 2 4G ELRS TX to Radio transmitter and choose External RF mode to CRSF protocol then you can find ELRS menu from the Radio systems Need to copy the ELRS LUA file to the SD Card tools first Enter into ELRS and press Bind the LED on the RX module will getting to be solid if bind successfully Receiver LED status meanings LED solid means bin
https://dorinebeaumont.com/g/e8f129b05ed12a4616dd6213826a88/?f_id=19343&ulp=https%3A%2F%2Fwww.banggood.com%2FFlywoo-EL24P-2_4GHz-ExpressLRS-ELRS-0_4g-Ultra-Lightweight-Open-Source-Nano-Receiver-for-FPV-Racer-Drone-p-2005091.html%3Fcurrency%3DEUR