Was: 12.75
Price: 10.49
Specification Model DY AP3015 Working voltage DC 8 24V Working mode Class D PWM modulation Number of channels stereo two channels Maximum output power 1KHz 18W 2 12V 4 10W 2 12V 8 15W 2 16V 8 20W 2 20V 8 30W 2 24V 8 requires heat sink Adapter speaker 30W 150W 4 ohms 8 12V power supply 8 ohms 8 24V power supply Module protection mechanism reverse power protection Short circuit protection self recovery overheat protectionUsage 1 Recommended power supply voltage DC 8 24V more than 26V the chip will burn out there will be noise below 8V 2 The power supply does not exceed 12V when connected to a 4 speaker and the power supply does not exceed 24V when connected to an 8 ohm speaker 3 The power supply current is recommended to be 2A or more 4 The module working power exceeds 20W 2 need to add heat sink 5 Ensure that the input source signal is between 0 5V and 1 5V 6 The speaker cable should not be too long to ensure that within 1 meter 7 Pay attention to static electricity protection Before touching the power amplifier board you need to release the static electricity on your hand to avoid static electricity from penetrating the power amplifier chip The digital power amplifier is sensitive to static electricity 8 It is recommended to use the speaker rated power 30W and above to avoid the burning of the speaker Package Included 3 x DY AP3015 30W x2 Stereo Amplifier Module
https://ad.admitad.com/g/e8f129b05ed12a4616dd6213826a88/?f_id=19362&ulp=https%3A%2F%2Fwww.banggood.com%2F3pcs-DY-AP3015-DC-8-24V-30W-x-2-Class-D-Dual-Channel-High-Power-Stereo-Digital-Amplifier-Board-with-Adjustable-Volume-Potentiometer-p-1585994.html%3Fcurrency%3DEUR&i=5
Leave a Reply