Was: 246.95
Price: 176.39
Feature This induction heating circuit uses a 12 48V low voltage DC power supply with a maximum current of 50A and a maximum power of 2500W Continuous operation under conditions of good heat dissipation Because of its moderate power it can be used for DIY players to quench annealing and other heat treatment of small parts It can also be used with graphite crucible to smelt gold silver copper aluminum and other metals The heating is even and fast very convenient Physical and electrical parameters 1 Size 120 240 85 unit mm 2 Working voltage 12 50V3 Maximum working voltage 48V4 Maximum working power 2500W5 Maximum working current 50APrecautions for use 1 No matter in any case do not allow no load power on no load refers to the output port without any load Once the power is turned on by no load the board will emit high frequency noise which will cause the MOS tube to be completely damaged and cannot be repaired 2 Please note that when using a switching power supply because a high power switching power supply generally has a slow start function that is it slowly rises at the beginning of the output voltage and if the voltage is turned on to 11V before the induction heating circuit is turned on the circuit will not vibrate because of insufficient voltage so that the two MOS tubes are turned on at the same time to burn the components Therefore so it is necessary to wait until the switching power supply voltage is stable Induction heating cir
https://ad.admitad.com/g/e8f129b05ed12a4616dd6213826a88/?f_id=19362&ulp=https%3A%2F%2Fwww.banggood.com%2FGeekcreit-2500W-48V-50A-ZVS-Induction-Heating-Module-High-Frequency-Heating-Machine-Melt-Metal-Coil-With-Power-Supply-Full-Kit-p-1449993.html%3Fcurrency%3DEUR&i=5
Leave a Reply